These
Mica Strip Heaters can be manufactured in
either a standard strip with 3/8" fold
overs, or in a butt case design. Recommended
watts per square inch are 22 for a strip
heater and 28 for a butt case. A strip heater
curved more than 60 Deg. is a partial coverage
band heater.
Mounting
slots are optional on a mica strip heater.
A standard slot size is 5/16" x 1/2"
and centered 3/8" from the edge of
the strip. For other mounting slot options
consult the factory.
All
strip and butt case heaters are approximately
3/16" thick. |
